Installation of coppers
Installation of coppers of type VN-Mch
is supposed only in uninhabited premises in volume not less than 7,5 м3, having
the ventilating channel and a lattice with the area of live section not less than
0,02 м2 or a backlash between a door and a floor the same area. At copper installation
in kitchen its cubic capacity should be on 6 м3 more demanded for installation
of gas cookers. The distance between acting parts of a torch of a copper and an
opposite wall should be not less than 1,0 m, and distance between lateral both
back walls of a copper and a wall of a premise not less than 0,4 m. the Copper
joins a flue pipes from a roofing steel (8 = 0,8 ^-ch-1 mm), diameter of connecting
pipes should not be less, than at a branch pipe. The minimum size of depression
in a flue 0,3мм waters. mytrip letenky . Descubrir casino en linea paginas . Alex tried Mac uninstaller and told me it's ok. Квадратный метр всего, металлопластиковые окна киев .
The total length of horizontal sites of connecting pipes for tap of products
of burning should be in again under construction buildings no more than 3 and
in existing houses no more than 6 m. Size of a vertical site of a connecting pipe,
considering from a branch pipe of the device to an axis of a horizontal site of
a pipe, there should be not less than 0,5 m. In premises in height of 2.7 m the
vertical site of 0,25 m. Connecting pipes is supposed should have a bias towards
a copper not less than 0,01. Links of connecting pipes should densely, without
backlashes, move one to another on a course of products.
Burning not less than for 0,5 diameters of a pipe. Go and watch online movies website . Awesome t mobile refill cards are waiting for you at our site comfi.com . Высококачественные Matador MP 16 Stella 2 Ищу интернет магазин где можно купить
 The lining
of connecting pipes through premises is forbidden. The connecting pipes laid in
cold premises, are warmed.
At installation of heating copper VN-Mch planting
pipeline of hot water lay under a ceiling, and the return pipeline - over a premise
floor. The minimum bias of pipelines accept 0,003. Radiators establish on distance
of 100-150 mm from a floor. Before each radiator on the pipeline of hot water
establish крапы double adjustment. The water gate on a water delivery line at
copper work should be closed. Open it only periodically for replenishment of system
of heating by water.
Before copper start-up it is necessary to be convinced that the system is
filled, what it is possible to judge on occurrence of water from an alarm pipe
at a bowl. Then it is necessary to include a plug plug of the transformer in the
electric system and to open the crane on gas pipeline descent to a copper.
more>>> |
