|
Capacitor water heaters of type AGV with tap of products of combustion
in a flue can be established both bathrooms and kitchens. The bathroom volume
should be not less (5 mm, the premise should have the ventilating channel. At
installation on kitchen its volume should be on 0.и3 more necessary for installation
there gas cookers.
Water heaters attach to a flue pipes from a roofing steel in the thickness
of 0,8-1,0 mm, and diameter of connecting pipes should be not less than 80 mm
for AGV-50М m AGV-80М and not less than 100 mm to AGV-120. Total length of horizontal
sites. Garagedeur . gift ideas . nolvadex 20mg
 Connecting
pipes should be no more than 3 m for new buildings and no more than 6 m for existing
houses.tadalafil 10mg;accutane information
Size of a vertical site of a connecting pipe, considering from a branch
pipe of the device prior to the beginning of its turn, should be not less than
0,5 and in premises with height to 2,7 m the vertical site of 0,25 m. supposed.
The pipeline of hot water to radiators and for water analysis are laid a
floor by a ceiling, and return - over a premise floor. The water spent gate in
device work on heating should be closed and open it follows only periodically
for replenishment of system by water. At using hot water крапы on the submitting
and return pipeline of system of heating it is necessary to close, and on подвинточном
the pipeline - to open.
Before each radiator on a supply of hot water establish cranes of double
adjustment. The distance from a bottom of a radiator to a floor should be 100-150
mm.
more>>> |
