|
For water heater start-up in action it is necessary to be convinced
that it is filled by water, in a flue there is a depression and the gas crane
in front of the device is opened. Further it is necessary to light Kindle a match
and to press the button of the electromagnetic valve. After 1-2 mines to release
the button and, having convinced that Kindle burns, to open crones before a torch.
Thus the torch should be lighted from Kindleа. Right after device inclusions it
is necessary to check up repeatedly depression presence in a flue (if the flame
of the Burning match brought to тягопрерывателью, is involved in a pipe depression
is). In case of absence in a flue it is impossible to use a water heater.
 Change
of heating of water in a water heater is reached by moving of an arrow-index of
a temperature regulator. For fall of temperature of heating of water the index
needs to be moved downwards, and for water rise in temperature - upwards. Дли
device deenergizings are necessary for closing gas in front of the device and
before a torch.
AGV-120 Differs from considered above more heat producivity and dimensions,
and also change of the block of automatics of regulation. Unlike AGV-80М the bottom
bottom of the tank at AGV-120 forms a shirt promoting improvement of a heat transfer
and fall of temperature of the bottom part of a casing. Doors a casing позволяв
to take out a torch, Kindle and the thermocouple without water heater dismantling.
 Elements
of automatics of regulation are silfonный a temperature regulator and a thermocylinder
filled with kerosene. At water rise in temperature in the tank the thermocylinder
heats up also the kerosene which is in it, extends. On the capillary tube connecting
a thermocylinder with a temperature regulator, pressure is transferred in silfon
which starts to change I will accustom to drinking length.
|
