|
The gas kontaktno-superficial water heater forsunochno-nasadochnogo
type consists of the contact chamber, a fire chamber and the exhaust device. The
contact chamber is executed in the form of the cylinder in which nozzles from
ceramic rings of an atomizer take place. In it there is a direct contact of hot
products of burning with water. In the top part of the contact chamber the small
nozzle in height of 100 mm, being влагоуловителем takes place. It prevents hit
of splashes of drops in a chimney. The basic nozzle in height of 300 mm is more
low located. Water in the device moves two streams: on the basic nozzle and in
located under it to an atomizer.
For uniform distribution of sprayed water on section of the chamber she
moves at various levels through the atomizers established in chessboard order. Here you can download western movie on any taste. . cheap maya models in our store
 Water,
hot in contact chambers high-temperature products of burning, flows down on a
disk and then merges through four connecting tubes in the bottom part of a fire
chamber.
The water sated with carbonic acid and oxygen in the contact chamber,
is possible in a fire chamber before volume boiling. At boiling from water corrosion
components are allocated: carbonic acid and oxygen which together with water steam
gather in and then arrive in the contact chamber, whence have with products of
combustion of gas leave in atmosphere. The top internal chamber represents vertically
established cylinder in which there is a gas burning. Removal of products of combustion
from the device is carried out by centrifugal fan EVR-3.
The sizes of the device, mm: diameter of the contact chamber 1100, diameter
of the top internal chamber 1700, width of the device 2000, the general height
3600. Weight of metal parts (including torches) 1900 kg, gross weight (with футеровкой)
4200 kg.
more>>> |
